CAMC-IP型二轴运动控制电路的功能及应用

CAMC-IP是韩国AXT公司开发的二轴运动控制电路,详细介绍CAMC-IP的主要功能、特点及其内部结构,简要介绍以CAMC-IP为核心的基于PCI总线运动控制卡的设计.     

中国水工程移民补偿机制发展与改革

对我国水工程移民经济补偿政策发展进行了历史性的回顾;剖析了当前水工程建设征地补偿和移民安置中经济补偿存在的主要问题:土地产权制度问题,土地补偿补助标准测算缺陷问题,工程建设中征地行为不规范问题,征地补助费偏低问题,移民安置规划审批需要改革的问题,国家经济体制和经济建设新形势下移民安置中的新问题;对今后移民经济补偿机制的改革提出了建议:进一步完善征用土地补偿制度,提高征地补偿补助标准,高度重视移民前期工作,强调地方人民政府是移民安置的责任主体,保护移民的参与权与申诉权,制定《中华人民共和国非自愿移民法》。     

A two-stage algorithm for identification of nonlinear dynamic systems

This paper investigates the two-stage stepwise identification for a class of nonlinear dynamic systems that can be described by linear-in-the-parameters models, and the model has to be built from a very large pool of basis functions or model terms. The main objective is to improve the compactness of the model that is obtained by the forward stepwise methods, while retaining the computational efficiency. The proposed algorithm first generates an initial model using a forward stepwise procedure. The significance of each selected term is then reviewed at the second stage and all insignificant ones are replaced, resulting in an optimised compact model with significantly improved performance. The main contribution of this paper is that these two stages are performed within a well-defined regression context, leading to significantly reduced computational complexity. The efficiency of the algorithm is confirmed by the computational complexity analysis, and its effectiveness is demonstrated by the simulation results.     

高功率DPL光束质量研究

为了在高功率DPL中获取高光束质量输出激光，利用扭转模获取高光束质量种籽源的同时，进行了高重复频率下的热致及光致双折射效应的补偿、高功率二极管均匀泵浦聚光腔设计及相位共轭镜用于改善激光系统光束质量等特性研究。最终获得了重复频率40Hz、单脉冲能量大于400mJ、近衍射极限的高光束质量激光输出。这种方法对高功率激光系统的设计十分有用。     

Design,Implementation, and Validation of KOMPSAT‐2 Software Simulator

In this paper, we present design features, implementation, and validation of a satellite simulator subsystem for the Korea Multi‐Purpose Satellite‐2 (KOMPSAT‐2). The satellite simulator subsystem is implemented on a personal computer to minimize costs and trouble on embedding onboard flight software into the simulator. An object‐oriented design methodology is employed to maximize software reusability. Also, instead of a high‐cost commercial database, XML is used for the manipulation of spacecraft characteristics data, telecommand, telemetry, and simulation data. The KOMPSAT‐2 satellite simulator subsystem is validated by various simulations for autonomous onboard launch and early orbit phase operations, anomaly operation, and science fine mode operation. It is also officially verified by successfully passing various tests such as the satellite simulator subsystem test, mission control element system integration test, interface test, site installation test, and acceptance test.     

无粘结预应力楼板新规范设计方法

目前国内现浇预应力楼板几乎均采用无粘结预应力方案,因而掌握其设计方法无疑具有现实意义。本文根据新规范,系统地介绍了高层建筑无粘结预应力楼板的设计方法,内容包括:设计原理、基本步骤及设计中需要注意的一些问题。     

300 MW汽轮机润滑油系统问题分析及优化措施

对某电厂300 MW汽轮机润滑油系统调试过程中出现的问题进行了分析,提出了优化措施,使润滑油系统更趋完善,提高系统运行的安全可靠性。     

广义频率响应函数的鲁棒建模新方法

针对基于非线性谱分析的故障诊断技术的需要,研究了非线性系统的广义频率响应函数的鲁棒在线建模方 法。首先将次元分析算法应用于Volterra级数模型的辨识,并通过对此算法的修正,得到了一种改进的Volterra系统的鲁 棒辨识算法。对其鲁棒性能进行的分析表明,改进算法的鲁棒抗噪性能被明显提高。在此基础上,提出了一种广义频率响 应函数的两步鲁棒建模新方法。仿真实验表明,该方法具有良好的鲁棒收敛性能,能够有效解决GFRF的在线建模问题。     

暖通空调工程设计常见问题

通过对施工图审查工作进行总结，指出了暖通空调和防火防排烟设计中存在的问题及防火规范本身的一些不足。     

非标准工况下空分设备增产氩的研究与实践

文章对非标准工况下的空分设备增产氩措施进行了研究。以宝钢6#60000m3/h空分设备为例,通过设计型算法和校核型算法,建立了空分设备精馏的数学模型,通过改变数学模型的参数,分析了在非标准工况下精馏塔内的组分浓度分布,并提出了优化后的操作方案和操作参数,实施后提高了空分设备的氩提取率,取得了显著的经济效益。